Ford Fusion Tail Light Bulbs Replacement Guide
Owners of other Ford, Lincoln or Mercury vehicles such as the Fiesta, Mustang, Focus, Taurus, Flex, Edge, Expedition, Escape, Ranger, F-150, MKZ, MKS, MKX, MKT, Navigator, Milan, Grand Marquis, Mariner, and Mountaineer may also find this instruction guide to be helpful. Replacement bulbs for the tail lights of a '06-'12 Ford Fusion from Sylvania and other manufacturers include the following with their part numbers: combination Brake / Rear Turn Signal bulb # 7443 and Reverse / Back Up bulb # 921.The only tool required is an automotive panel removal tool. A flathead screwdriver could be used instead. Remove Xmas Tree Fastener Remove 2nd Panel Fastener 2 Christmas Tree Fasteners The first steps are to open the trunk and locate the black plastic trim panel on the interior of the trunk. Remove the two black plastic Christmas Tree fasteners on the trim panel that are closest to the tail light with the burnt out bulb. To remove the Xmas Tree fasteners, pull them straight out with an automotive panel plastic fastener removal tool or carefully pry them out with a flathead screwdriver. Pull Back Trunk Trim Panel Brake / Signal Bulb Socket 1/4 Turn Counter Clockwise Once the two fasteners are removed, you can pull back the plastic trim panel and also the grey trunk carpeting. The brake / turn signal light bulb is contained in the larger tan / light orange colored socket. The reverse / back up light bulb is the smaller black / light grey socket. Pull Out Brake Bulb Pull Bulb Straight Out # 7443 Light Bulb To remove the brake / turn signal light bulb socket, rotate it 1/4 turn counter clockwise and pull it straight out of the tail light assembly. Push In New # 7443 Bulb Insert Bulb & Socket 1/4 Turn Clockwise Remove the old # 7443 light bulb by pulling it straight out of the socket. Push in a new # 7443bulb, insert it back into the tail light assembly and rotate the socket 1/4 turn clockwise to secure it in place. I recommend using the Sylvania 7443 LL long life light bulbs. Reverse / Back Up Socket 1/4 Turn Counter Clockwise Pull Out # 921 Light Bulb To remove the reverse (back up) light bulb, rotate the smaller black/grey socket 1/4 turn counter clockwise and pull it straight out of the tail light assembly. Pull the old # 921 light bulb straight out of the socket and push in a new bulb. I recommend buying the Sylvania 921 LL long life light bulbs since they tend to last for years. Re-insert the bulb into the tail light assembly and rotate it 1/4 turn clockwise to lock it in place. Push In New # 921 Bulb Rotate 1/4 Turn Clockwise Line Up Trunk Trim Panel Align the trunk's black plastic interior trim panel so that the holes in the panel line up with the holes in the carpeting and metal body work. Push in the two black plastic Christmas tree fasteners to secure the trim panel in place. Push In Xmas Tree Fasteners Testing Brake / Signal Bulb Test Reverse Light Bulb Test the new tail light bulb(s) by having someone step on the brake pedal, activate the turn signals and put the transmission in reverse. For more, please check out my Ford Fusion Repair & Maintenance Guides page. What bulb is in a 2010 Ford Fusion?Heliolite - Halogen Headlight Bulb - 9007 /HB5 (Part No. 4B40032737HLO)
Is the tail light and turn signal the same bulb?In many newer cars there is one light bulb per tail light. There are two filaments in each light bulb. One is for your brake light and one is for your turn signal. So when you're stopped with your turn signal on one filament stays on while the other blinks.
|