2011 mazda cx 7 tire size

2011 Mazda CX-7 wheels and tires sizes

Find out what wheels and tires fit 2011 Mazda CX-7

Check tables below to get wheel size, tire size, bolt pattern(PCD), rims offset and tire pressure.

Mazda CX-7 ER 2006 - 2012

CX-7 2.3TCX-7 2.5iCX-7 2.2TDCX-7 2.3TCX-7 2.3T (CBA-ER3P)

Generation: ER 2006 - 2012

USA Market model

Power: 244 hp

Engine: I4 , Petrol

Center Bore (DIA): 67.1 mm

PCD: 5x114.3

Thread Size: M12 x 1.5

2011 Mazda CX-7 2.5i

Generation: ER 2006 - 2012

USA Market model

Power: 161 hp

Engine: 2.5L, L5-VE, I4 , Petrol

Center Bore (DIA): 67.1 mm

PCD: 5x114.3

Thread Size: M12 x 1.5

2011 Mazda CX-7 2.2TD

Generation: ER 2006 - 2012

European Market model

Power: 170 hp

Engine: 2.2L, R2AA, I4 , Diesel

Center Bore (DIA): 67.1 mm

PCD: 5x114.3

Thread Size: M12 x 1.5

2011 Mazda CX-7 2.3T

Generation: ER 2006 - 2012

European Market model

Power: 235 hp

Engine: 2.3L, L3-VDT, I4 , Petrol

Center Bore (DIA): 67.1 mm

PCD: 5x114.3

Thread Size: M12 x 1.5

2011 Mazda CX-7 2.3T (CBA-ER3P)

Generation: ER 2006 - 2012

Japanese Domestic Market model

Power: 235 hp

Engine: I4 , Petrol

Center Bore (DIA): 67.1 mm

PCD: 5x114.3

Thread Size: M12 x 1.5

Other Mazda CX-7 production years

2006200720082009201020112012

Additional info:

Cars with 5x114.3 bolt pattern

Recent Articles

Search tires and wheels for a car

Tires and wheels sizes for Mazda CX-7 2011

US domestic market (USDM)
CX-7 ER

• 2.3T
• 2.5i

European domestic market (EUDM)
CX-7 ER

• 2.2TD

Mazda CX-7 ER 2011 2.3T

Sales market: US domestic market (USDM)
Generation: ER
Engine: I4, Petrol
Power: 244 hp (247 PS, 182 kW)

The Mazda CX-7 ER 2011 2.3T is fitted with 7.5Jx18 ET50 rims with tires 235/60 R18 103H as standard. Where is:

• 7.5J — rim width in inches;
• 18" — fitting rubber diameter in inches;
• ET50 — offset of the disk in millimeters.

Vehicle tyre markings 235/60 R18 are deciphered as follows:

• 235 — PROFILE width (cross section of the tyre) in millimetres;
• 60 — profile height in percentage of its width;
• R — radial winding of the cord;
• 18 — tyre diameter in inches..

In addition, information about its carrying capacity and speed parameters — load index and speed index — can be applied to rubber. The load index is a two or three-digit number, the speed index is indicated by Latin letters, e.g. 103H:

• 103 — the maximum allowable amount of weight the tire can carry 875 kg;
• H — the maximum allowable vehicle speed of 210 km/h.

Using the recommended tire sizes will help to avoid problems with driving management, safety and other difficulties. What non-standard sizes can be fitted? Please refer to the table above for possible alternative sizes for tuning. Although there may be other options that we have not described in the table. For example, discs that are wider than the same diameter. Or fit wheels of the same width, but of a larger diameter, which is quite popular among car owners. The choice of disks is huge, you can find copies with the same parameters, but with a offset size of 1-2 millimeters more or less. It is not possible to list all the options.

In this case, the bolt pattern is the same for all types of wheels — 5x114.3. Thus, all discs are mounted on five bolts and the distance between them is exactly one hundred fourteen point and 30 hundredths millimeters. Car hub diameter 67.1 mm.

Typical tyre pressure — 32 PSI (2.2 bar).

Mazda CX-7 ER 2011 2.5i

Sales market: US domestic market (USDM)
Generation: ER
Engine: I4, Petrol
Power: 161 hp (163 PS, 120 kW)

The Mazda CX-7 ER 2011 2.5i is fitted with 7Jx17 ET45 rims with tires 215/70 R17 105S as standard. Where is:

• 7J — rim width in inches;
• 17" — fitting rubber diameter in inches;
• ET45 — offset of the disk in millimeters.

Vehicle tyre markings 215/70 R17 are deciphered as follows:

• 215 — PROFILE width (cross section of the tyre) in millimetres;
• 70 — profile height in percentage of its width;
• R — radial winding of the cord;
• 17 — tyre diameter in inches..

In addition, information about its carrying capacity and speed parameters — load index and speed index — can be applied to rubber. The load index is a two or three-digit number, the speed index is indicated by Latin letters, e.g. 105S:

• 105 — the maximum allowable amount of weight the tire can carry 925 kg;
• S — the maximum allowable vehicle speed of 180 km/h.

Using the recommended tire sizes will help to avoid problems with driving management, safety and other difficulties. What non-standard sizes can be fitted? Please refer to the table above for possible alternative sizes for tuning. Although there may be other options that we have not described in the table. For example, discs that are wider than the same diameter. Or fit wheels of the same width, but of a larger diameter, which is quite popular among car owners. The choice of disks is huge, you can find copies with the same parameters, but with a offset size of 1-2 millimeters more or less. It is not possible to list all the options.

In this case, the bolt pattern is the same for all types of wheels — 5x114.3. Thus, all discs are mounted on five bolts and the distance between them is exactly one hundred fourteen point and 30 hundredths millimeters. Car hub diameter 67.1 mm.

Typical tyre pressure — 30 PSI (2 bar).

Mazda CX-7 ER 2011 2.2TD

Sales market: European domestic market (EUDM)
Generation: ER
Engine: I4, Diesel
Power: 174 hp (177 PS, 130 kW)

The Mazda CX-7 ER 2011 2.2TD is fitted with 7.5Jx18 ET50 rims with tires 235/60 R18 103H as standard. Where is:

• 7.5J — rim width in inches;
• 18" — fitting rubber diameter in inches;
• ET50 — offset of the disk in millimeters.

Vehicle tyre markings 235/60 R18 are deciphered as follows:

• 235 — PROFILE width (cross section of the tyre) in millimetres;
• 60 — profile height in percentage of its width;
• R — radial winding of the cord;
• 18 — tyre diameter in inches..

In addition, information about its carrying capacity and speed parameters — load index and speed index — can be applied to rubber. The load index is a two or three-digit number, the speed index is indicated by Latin letters, e.g. 103H:

• 103 — the maximum allowable amount of weight the tire can carry 875 kg;
• H — the maximum allowable vehicle speed of 210 km/h.

Using the recommended tire sizes will help to avoid problems with driving management, safety and other difficulties. What non-standard sizes can be fitted? Please refer to the table above for possible alternative sizes for tuning. Although there may be other options that we have not described in the table. For example, discs that are wider than the same diameter. Or fit wheels of the same width, but of a larger diameter, which is quite popular among car owners. The choice of disks is huge, you can find copies with the same parameters, but with a offset size of 1-2 millimeters more or less. It is not possible to list all the options.

In this case, the bolt pattern is the same for all types of wheels — 5x114.3. Thus, all discs are mounted on five bolts and the distance between them is exactly one hundred fourteen point and 30 hundredths millimeters. Car hub diameter 67.1 mm.

Typical tyre pressure — 32 PSI (2.2 bar).

Mazda CX-7 ER 2011 2.3T (CBA-ER3P)

Sales market: Japanese domestic market (JDM)
Generation: ER
Engine: I4, Petrol
Power: 235 hp (238 PS, 175 kW)

The Mazda CX-7 ER 2011 2.3T (CBA-ER3P) is fitted with 7.5Jx18 ET50 rims with tires 235/60 R18 103H as standard. Where is:

• 7.5J — rim width in inches;
• 18" — fitting rubber diameter in inches;
• ET50 — offset of the disk in millimeters.

Vehicle tyre markings 235/60 R18 are deciphered as follows:

• 235 — PROFILE width (cross section of the tyre) in millimetres;
• 60 — profile height in percentage of its width;
• R — radial winding of the cord;
• 18 — tyre diameter in inches..

In addition, information about its carrying capacity and speed parameters — load index and speed index — can be applied to rubber. The load index is a two or three-digit number, the speed index is indicated by Latin letters, e.g. 103H:

• 103 — the maximum allowable amount of weight the tire can carry 875 kg;
• H — the maximum allowable vehicle speed of 210 km/h.

Using the recommended tire sizes will help to avoid problems with driving management, safety and other difficulties. What non-standard sizes can be fitted? Please refer to the table above for possible alternative sizes for tuning. Although there may be other options that we have not described in the table. For example, discs that are wider than the same diameter. Or fit wheels of the same width, but of a larger diameter, which is quite popular among car owners. The choice of disks is huge, you can find copies with the same parameters, but with a offset size of 1-2 millimeters more or less. It is not possible to list all the options.

In this case, the bolt pattern is the same for all types of wheels — 5x114.3. Thus, all discs are mounted on five bolts and the distance between them is exactly one hundred fourteen point and 30 hundredths millimeters. Car hub diameter 67.1 mm.

Typical tyre pressure — 32 PSI (2.2 bar).

General summary information

Ranges of possible values for tires and disks Mazda CX-7 2011.

Expert advices

When choosing rubber for a car, you must first be guided by the manufacturer's instructions. Ask yourself a few questions.

• On which roads will the car be mainly used?
• Do you need increased cross-country ability?
• Which part of the road will be the city roads and which highway?
• Will the vehicle carry heavy loads?

Answers to these and similar questions will help determine which tire parameters need special attention.

3 types of wheel rims:

• Stamped (economical price category) — made from a sheet of iron by stamping on the press.
• Alloy — made by "casting" (more reliable than stamped).
• Forged (best quality and more expensive than the previous ones) — are made of light alloys by means of stamping at high temperatures.

The choice depends on financial possibilities. However, it should be borne in mind that the quality of the road surface on which one has to drive every day also has to be taken into account.

Thus, in case of hitting a road pit, the stamped disc will bend and will not harm the tire, and forged or cast tire can break it. There is a possibility that the molded disc may burst or crack.

It should also be noted that repairing "stamping" is cheaper than repairing cast or forged discs. But wheels with high-quality alloy and forged wheels less kill the suspension, because it is lighter and has a more perfect geometry (better balanced).

The same wheels can be rubbed with tires or not rubbed on the same car — the “wheel alignment” adjustment will help here.

It is the driver's responsibility to constantly monitor tyre pressure. This will avoid standard problems associated with the operation of the vehicle. Non-nominal pressure values often cause:

• driving impairments;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, the car is an order of magnitude easier to "pass" the various road irregularities. But it should be noted that a decrease in pressure even by 0.1 PSI leads to serious problems. The main ones include:

• higher fuel consumption;
• fast wear of extreme tread segments;
• less maneuverable.

Equally problematic is the pumped wheel. The central part of the balloon starts to stack quickly. In addition, if the ambient temperature is more than 140 °F (60 degrees Celsius), the tire can simply explode. Which will lead to an exit in the oncoming lane.

What size tires does a Mazda CX

What size tires go on a 2010 Mazda CX

What size are the tires on a Mazda cx7 2007?

Is Mazda CX