Document Show pro keys with trackpad Warranty Registration INSERTING YOUR DEVICE1. Holding your device in landscape mode with the volume control buttons facing up, press the top half of your device into the case and apply light pressure to snap it snuggly into place. ATTACHING KEYBOARD AND CASE1. The bottom rim of the case (in landscape position) magnetically attaches to the spine of the keyboard (above the keys). REMOVING YOUR DEVICE1. To detach the case from the keyboard, simply pull the magnetized back flap away from the case, and lift the case away from the keyboard.. POWERING ON AND OFF1. To turn your Pro Keys with Trackpad on, press the Power button located at the top right corner of the keyboard. A green LED will light briefly. PAIRING YOUR PRO KEYS WITH A TRACKPADYour Pro Keys keyboard can pair with up to two devices at once. Pairing your Pro Keys is easy. Just follow these instructions. 1. Ensure your device’s Bluetooth® is on. DISCONNECTING YOUR KEYBOARDPro Keys with Trackpad features a case that protects your device even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can switch to your onscreen keyboard. 1. To activate your device’s keyboard once disconnected, press the Keyboard Hide/Show button. CHARGING YOUR KEYBOARDYour Pro Keys features a powerful lithium polymer battery that lasts up to three months of normal use between charges.* To charge your Pro Keys, follow these steps: 1. Plug the USB Type-C®
connector into the charging port on the keyboard. (Charging cable not included with Pro Keys with Trackpad for the iPad 10.9/11-inch.) BATTERY LIFETo check your Pro Keys’ battery life, press fn + the battery key. The LED light will flash one of the following three ways: • 3 green flashes = 50% or more battery life USING THE TRACKPADThe trackpad toggles on and off. Press with one finger until you feel a click. Click and Hold: Press and hold with one finger. Drag: Click and hold an item, then slide your finger across the trackpad to move it. Scroll Up or Down: Swipe two fingers up or down. When two fingers swipe up, the screen scrolls down. When two fingers swipe down, the screen scrolls up. Scroll Left or Right: Swipe two fingers left or right. SPECIAL FUNCTION KEYSYour Pro Keys with Trackpad has been designed with the following special function keys to give you more control of your device. 1 & 2 PAIRING – Activates your device’s pairing
mode. TROUBLESHOOTINGIf your device doesn’t respond to Pro Keys, there may be a simple explanation such as a dead battery or unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, please contact ZAGG Customer Service and one of our trained professionals will be happy to assist you. 1. Restart your device. Please read the precautions and operation information before using your keyboard or any accessories that accompany it. Retain this information for future use. 1. Take frequent breaks
when using your keyboard. If you experience any discomfort, pain, tingling, numbness, or burning in your neck, shoulders, arms, wrists, hands, or any other part of the body, stop using your keyboard and consult a physician. ©2021 ZAGG Inc All Rights Reserved Documents / ResourcesReferencesHow do I put my Zagg keyboard into pairing mode?Press and hold the Bluetooth® button on the ZAGG keyboard for 3-4 seconds.. Click on Bluetooth button on ZAGG keyboard and see status light flash.. You should see ZAGG keyboard listed as an “Available Device.”. Select ZAGG keyboard by touching it on your device.. Your ZAGG keyboard should now be paired.. Why is my Zagg keyboard not connecting?Reset your Limitless Keyboard by turning it off and then back on. The LED will light green for one second and then begin flashing red. This indicates the reset process has happened. Your keyboard will then begin charging.
Where is the Bluetooth button on ZAGG keyboard?Push the Pairing key on your Zagg keyboard, right next to the On/Off button. 7. A blue light on the side will flash until it is ready for pairing.
|