How do i reset the filter status on my ge refrigerator

I changed my filter, but my refrigerator filter change light is still on!

We often get questions on why someone’s refrigerator filter change light is still on after they have installed the replacement filter.  Often times a customer wants to know if the filter is defective.  There is a very slim chance of a water filter being defective.  Instead, the most common reasons are that the change light needs to be reset.  Typically, this light is a timer meant to remind you to change your filter every 3 to 6 months.  However, some change filter lights do gauge the flow of water and recommend a replacement filter.

So, how to reset your refrigerator change filter light?  Just following these steps:

Step 1:  Make sure that your filter has been installed correctly and that it forms a good seal.  Always check for any leaks or cracks on your filter or your filter receiver.  If it does not feel like the filter has locked into place, then remove it and start over.  Very little force should be used when replacing the filter.  Make sure that you do not strip the threads.  If you strip the threads installing the filter, all other filters will not make a tight connection with the receiver.

Step 2:  Once you have installed your filter, you have to tell your refrigerator that there is a new filter.  Remember, this is a reminder light (similar to a 6 month timer) telling you that it is time to replace the filter.  Some refrigerators change the light based on time and others based on water flow rate.

Color Guide:

Green:  This indicates that the filter is new and does not need to be changed

Yellow:  This indicates that the filter is about half way through its life expectancy

Red:  This indicates that the filter needs to be changed.

You can almost always get a full six months out of your filter.  Red does not mean you can no longer use the filter or that your water is not being filtered.  It just means you should change it as soon as possible.

The following is a guide to changing your filter for some refrigerator brands:

Amana –  Press and hold the “Auto” and “Dispenser Lock” buttons (may have a padlock on them), until the water filter status indicator light flashes.

Frigidaire – Press and hold the “Reset” button.  The indicator light will flash and then reset.

GE –  Press and hold the “Reset” button for approximately 8 to 10 seconds.

Jenn-Air – Press and hold the “Light” and “Lock” buttons until the filter light flashes (allow up to 10 seconds).

KitchenAid – Press and release the “Light” button 5 times.

Maytag – Press and hold the “Light” and “Lock” buttons until the filter light flashes for approximately 8 to 10 seconds).

Samsung – Press and hold the “Ice Type (Cubed or Crushed)” and “Child Lock” buttons at the same time for approximately 3 to 5 seconds.

LG – Press and hold the “Filter” button or “Reset” button for approximately 5 seconds.

Whirlpool – Press and release the “Light” button 5 to 6 times quickly.  This is the button that turns on your light inside of your refrigerator.  It is usually located at the top or bottom of the door where it closes.

It’s that time again – that pesky refrigerator filter indicator light has changed colors and is bugging you to change your fridge’s water filter. Whether you’re trying find information on how to replace your Whirlpool refrigerator water filter, Frigidaire refrigerator water filter, Samsung refrigerator water filter or GE refrigerator water filter, we’re here to help!

Refrigerator brands are not created equally, so what type of refrigerator filter you need, where your refrigerator filter is located, and how you change your fridge water filter will be different.

Trying to find the right fridge filter? Browse our wide selection of refrigerator water filters by clicking the button below.

Find Your Refrigerator Filter

Looking for more information on how to replace a refrigerator water filter? Check out our blog about troubleshooting tips for installing your refrigerator water filter.

When you change your refrigerator water filter, there are two additional steps that should be taken to properly complete the water filter change.

Most new refrigerators are designed with an indicator light that notifies you when it’s time to change your water filter. This light will not automatically reset when you change your water filter, so you must manually reset it.

For most refrigerators, the filter change light is on a timer ranging from 6-18 months. The change filter light is not an indication of the quality of your filter. We recommend changing your refrigerator filter at least every 6 months to ensure that you have purified, great-tasting water at all times.

Here is a list of how to reset the filter change indicator light based on your refrigerator’s manufacturer:

• Amana Refrigerator: Press and hold the Auto and Dispenser Lock buttons until the water filter status indicator light flashes.
• Frigidaire Refrigerator: Press Options button until they all show, then scroll to water filter and hold set button to reset do the same for the air filter.
• General Electric or GE Refrigerator: Press and hold the Reset Button for at least 8 Seconds.
• HotPoint Refrigerator: Press and hold the Reset Button for at least 8 Seconds.
• Jenn-Air Refrigerator: Press and hold the Water and Lock Buttons until the Water Filter light flashes.
• Kitchen Aid Refrigerator: Press and release the Light Button 5 times quickly.
• Maytag Refrigerator: Press and hold the Light and Lock Buttons until the Water Filter light flashes.
• Samsung Refrigerator: Press and hold the Ice Type and Child Lock Buttons at the same time for 3 seconds.
• Whirlpool Refrigerator: Press and release the Light Button 5 times quickly.

Step 2: Flush a couple of gallons of water through your new filter.

Refrigerator water filters are made of carbon media, and some carbon dust will likely be in your water the first few times you dispense it. Is drinking carbon dust bad for you? Drinking carbon flecks will not harm you, but will make your water taste a bit bitter. If you continue to see carbon floating in your water after flushing a couple of gallons through the filter, it is possible that you have a defective water filter.

For more tips on flushing your refrigerator water filter check out our blog post on flushing your fridge filter.

Once you complete the two steps, you can start enjoying great-tasting ice and water through your refrigerator. If your refrigerator’s brand is not listed or the instructions don’t work for your model, we would recommend checking your refrigerator owner’s manual for instructions.

Can’t find what you need? Feel free to post a comment with the make and model number of your refrigerator and we would be happy to try and help you find the right instructions for your model.

Wish there were an easier way to remember when to change your refrigerator water filter? Sign up for our Home Filter Club subscription! Our refrigerator filter subscription service allows you to have your fridge filter delivered to your door when it needs to be changed. Plus, you can save up to 10% off and get free shipping on each order! What’s not to love?

Learn More