How hot does a self cleaning oven get

• Double Oven Range
• Front Control Slide-In Ranges
• Cleaning Options
• Installation Options
• Ranges 101

Cleaning Options for Your Gas, Electric or Dual Fuel Range

Despite our best efforts, all of us have experienced an inevitable spill-over in the oven at one point or another. Whether it's cheese melting off your pizza, or a cobbler oozing over the baking dish, spills inside the oven leave a mess! When shopping for a new range, it's important to understand the options that are available for cleaning. Here are a few of the cleaning options available in GE ranges.

Self-Clean Ovens

The self-clean cycle is a time-saving convenience feature. The oven is cleaned by heat, at temperatures above normal cooking temperatures. During the cleaning cycle the oven is heated to about 880 degrees Fahrenheit (471° C.). At this temperature, food soils inside the oven decompose, leaving behind a small amount of ash. The leftover ash is similar to cigarette ashes, and wipes out easily with a wet cloth.

The cycle takes from one and a half hours to three hours, depending upon the amount of soil. A slight odor may be detected the first few times the oven is cleaned. No commercial oven cleaner or oven liner of any kind should be used in or around any part the of the self-clean oven. Do not use pieces of aluminum foil to catch spillovers. Depending on your oven model, the pans and racks may need to be removed. As a general rule, you may leave self clean racks in your oven, but you must remove stainless steel racks.

Self-Cleaning Ranges

Self-Clean Ovens with Steam

Avoid the time required for conventional self-clean ovens. Steam Clean allows for quick cleaning of minor food spills at temperatures lower than the standard self-clean feature. Simply pour 1 cup of water into the bottom of a cool oven. Close the door and select Steam Clean. The cycle lasts about 30 minutes, and loosens and softens the grime in the oven. Once the cycle is complete, wipe out the moisture and food soils with a soft cloth. Because Steam Clean uses a lower temperature and does not involve chemicals, pans and racks can remain in the oven during cleaning.

In the event there is a difficult to remove spill or the spill is baked on multiple times, a cleaner made for use in ovens may be used. Be sure to follow the instructions on the product label. GE Appliances recommends Bar Keepers Friend or a solution of vinegar and baking soda. Care should be taken to remove these cleaners prior to range use.

You may also clean your range by using the ammonia method described below for manual clean ranges.

Video: Steam Clean Your Range

Self-Cleaning Ranges with Steam Clean

Manual Clean Ovens

Manual Clean ovens do not have self-clean or steam clean features, and require cleaning by hand. Frequent wiping with mild soap and water (particularly after cooking meat) will prolong the time between major cleanings.

For light food soils, soap, water and a scouring pad should be all that is needed. Tougher soils might require a commercial oven cleaner made for use in a standard clean oven. Be sure to follow the instructions on the product label.The job of cleaning a standard clean oven can be made easier by using household ammonia. Place 1/2 cup in a shallow glass or pottery container in a cold oven overnight. The ammonia fumes will help loosen the burned-on grease and food.

Caution: Do not turn oven on while ammonia is inside.

Manual Clean Ranges

Glass Cooktop Care

Keeping your range looking new is easy if you watch this quick use and care video. From selecting the best cleaners, proper maintenance practices, to identifying the proper cookware this video will show you all you need to know about enjoying your new range. In addition, please reference the use and care manual by typing your model number in the search box at the top of this page for comprehensive instructions and guidelines.

Video: Use and Care For Your Cooktop

Weigh the pros and cons of using the self-clean feature of your oven before putting it to the test.

Photo: istockphoto.com

Q: The oven in my new house has a self-clean feature, but I’ve heard there are pros and cons to using it. Should I try it, and is it a viable replacement for manually cleaning my oven?

A: On paper, it’s a home-keeper’s dream come true: an oven that actually cleans itself! In practice, this function—developed in the early 1960s for both gas and electric ovens—can be confusing, even controversial. The term is actually something of a misnomer, too, because there will always be some manual cleaning involved. What’s more, the function is by no means intended to replace a hands-on cleaning routine.

Some folks swear by the time-saving convenience, while others have sworn it off due to a few unfortunate drawbacks—and we’ve laid it all out here to help you decide whether this feature will work for you.

How do self-cleaning ovens work?

Photo: istockphoto.com

The self-clean function works by blasting either high heat or steam throughout the oven interior to release—and burn up in the case of high-heat ovens—hardened food remains. This saves the time and effort of getting on your knees and scouring stubborn gunk with a scrubber and also does away with the need for pricey, chemical-laden commercial cleaners. Simply start a self-clean cycle and allow it to work; when the cycle is complete, use a water-dampened rag to manually remove loosened debris from the oven’s smooth, heat-resistant enamel coating.

• In high-heat models, the self-clean cycle is usually initiated by closing the oven door and setting the oven to a “self-clean” mode. In most modern ovens, the oven door automatically locks and the temperature rises to between 800 and 1,000 degrees Fahrenheit to incinerate any food remains, in a cycle lasting between two to six hours. Once the cycle is complete and the oven has cooled completely, the door automatically unlocks.
• The self-clean cycle of a steam-based model is usually initiated by pouring roughly one cup of distilled water into the floor of the oven, then closing the door and setting the appliance to “steam clean” mode. During the cycle, which lasts half an hour to an hour, the oven door remains unlocked and the interior temperature rises to about 250 degrees Fahrenheit, hot enough to generate steam that softens and loosens food remains.

High heat beats steam on heavy-duty grime.

High-temperature self-cleaning ovens evenly distribute heat throughout the chamber, so you’ll rarely find leftover food residue on the sidewalls or ceiling. Steam-based self-clean cycles, however, tend to generate the most steam near the bottom of the oven (where the water is poured)—so while this effectively removes food debris on the oven floor and lower sidewalls, you may still need to manually scrub the ceiling and upper sidewalls.

Photo: istockphoto.com

Beware of fumes and oven failures.

Both high-heat and steam self-cleaning ovens can emit unpleasant burning odors and fumes, and even harmful by-products like carbon monoxide, from the vent of the oven during the cleaning cycle. High-heat models tend to emit a higher volume of more noxious fumes due to the extreme temperature. These fumes emanate from both food particles and the enamel lining that coats the oven interior. Fumes circulating in the kitchen can irritate pets,, and people, especially those who suffer from respiratory conditions.

Excessive heat buildup in the oven can also short a thermal fuse or burn out a heating element. While a one-time, do-it-yourself replacement of a blown fuse or a heating element should set you back no more than $30 in parts, repeat occurrences can become costly and time-consuming.

Replacement parts won’t be the only expenses with the self-clean feature.

Consider the amount of energy (and the money) it takes to run the oven at high levels for an extended period of time. A single high-heat self-clean cycle can consume 8 kilowatt hours (kWh) of energy on average (roughly the equivalent of a month’s use of a traditional oven), while the average steam self-clean cycle consumes less than 3 kWh of energy.

Proper preparation is key.

If you choose to try out the feature, you can take steps to mitigate the risks of using the self-clean setting and ensure that the cleaning cycle runs without hiccups. Follow these safety rules:

• Install a carbon monoxide detector in your kitchen to monitor for harmful fumes.
• Before running a self-clean cycle, remove all pots and pans and any metal oven grates or aluminum foil shards. In the high heat of the self-clean cycle, the debris on charred metal grates can catch fire, while foil can melt onto the oven’s interior lining and warp it.
• Prior to using the feature, “You should try to remove any visible debris,” according to Ron Shimek, president of Mr. Appliance, an appliance repair company with franchises nationwide. Remove chunks of food, and wipe up spills with a water-dampened rag.
• Prior to starting a self-clean cycle, ensure the oven vent, located above or below the oven door or behind the oven door handle, is uncovered. If you have a range (an oven connected to a stove), turn on the exhaust fan on the range hood to ensure that fumes get expelled to the outdoors. If you don’t have a range hood, ventilate the room by opening windows.
• Aim to use the self-cleaning feature only when the oven is heavily soiled. In fact, Shimek recommends using this feature only once per year. Schedule your cleaning well before or after holidays or other occasions when you know you’ll need the oven so that any malfunction won’t interfere with your hosting duties.

Photo: istockphoto.com

Instructions: How to Self-Clean an Oven

Before beginning a self-cleaning process, Shimek suggests consulting your oven’s instructions. “Always reference and follow the directions in your appliance’s owner’s manual,” he says. If you no longer have a physical copy, you may be able to find one online.

• Follow preparation steps as outlined above.
• If you have a steam-clean oven, pour about a cup of distilled water into the floor of the oven.
• If you’re cleaning a high-heat oven and it doesn’t automatically lock as part of the cleaning process, lock it.
• If your oven allows you to adjust the time of the self-clean cycle, consider setting it to the shortest possible duration to reduce the risk of overheating (which can lead to blown fuses and other mechanical issues) and also reduce energy consumption. If your oven’s quite a mess, however, you may need to select a longer cleaning period.
• When the cleaning period is over, let the oven cool completely; this can take a couple of hours if you have a high-temperature-cleaning oven. Steam-cleaned ovens will cool more quickly after a cleaning cycle.
• When the cleaning is complete, and the oven is cool, the oven may unlock automatically, depending on the model. Otherwise, manually unlock.
• Open the oven door and clean out debris using a rag or even a vacuum.

Maintain a manual cleaning routine.

The self-clean feature wasn’t designed to replace manual cleaning. Following oven use, wipe down wet food or liquids from the inner door glass, sidewalls, floor, and ceiling with a water-dampened rag.

On a monthly basis, clean the interior and racks of your self-cleaning oven as you would clean a traditional oven, preferably using safe, natural agents. “Combining water with equal parts of white vinegar and baking soda should do the trick,” says Shimek.

Never use abrasive cleaning utensils (e.g., steel wool) or chemical cleaners in self-cleaning ovens, which could easily damage the interior enamel coating.

Photo: istockphoto.com

FAQ About Self-Cleaning Ovens

Do self cleaning ovens really work?

They do. They generally successfully burn up or steam off most oven gunk. The cleaning may come at a cost, however, in that problems with the inner workings of the oven can crop up after a cleaning, and fumes produced by the cleaning process may prove irritating.

Is it safe to be in the house when cleaning the oven?

Fumes emanating from the cleaning process can irritate pets and people, so if you can spend some time out in the garden or backyard while the oven does its thing, that might be best.

How do I use the self-clean on my oven?

Remove racks, large chunks of food, and any aluminum foil bits from the oven. If the oven is steam-cleaning, pour one cup of distilled water into the floor of the oven. If you’re using a heat-clean oven, lock the oven and set the self-cleaning function. When cleaning is complete, let the oven cool and then wipe or vacuum out the residue.

How long does a self cleaning oven take?

Ovens vary, but a cleaning cycle generally takes anywhere from 30 minutes to six hours. On some ovens, you can specify the length of the cleaning; on others, you cannot.

Final Thoughts

While the convenience of simply pushing a button and getting a clean oven is certainly attractive, there are trade-offs you might want to consider before pressing “start.” Fumes can be irritating to those with respiratory problems, and the extreme heat of the self-cleaning process can be damaging to oven parts. Using the self-cleaning functionality is fairly simple: just a bit of prep work to begin with and a little clean-up after, and that’s it!

Is it safe to be in the house when cleaning the oven?

Can an oven self

How long does it take for a self

Can I self