How much does it cost to fix a sidewalk

Q: How much concrete do I need for a sidewalk?

For the average 200-square-foot sidewalk, youll need around 2.5 cubic yards of concrete. This will cost you around $250, but you should order more on the off chance that your sidewalk is thicker than the 4-inch average. Youll also need to pay a local pro to deliver the concrete.

The average cost to repair a concrete sidewalk or patio is $5 to $11 per square foot, or about $500 to $1,100 for a 100-square-foot section, when work is minimal. That’s slightly less than the cost of a concrete sidewalk, newly installed. Repair work can range from fixing cracks and holes, as well as completely resurfacing and sealing.

Table of Contents Show

Stamped Concrete
Cost to Repair a Sidewalk or Patio by Type of Damage
How Much Does Sidewalk Repair Cost?
Cost Breakdown
Concrete sidewalk
Brick repairs
Landscaping costs
How do you fix an uneven sidewalk?
How much concrete do I need for a sidewalk?

More serious problems, like sunken or cracked cement or concrete completely in need of replacing, can cost up to $20 per square foot, or $2,000 for a 100-square-foot project.

Stamped Concrete

A new stamped concrete walkway can cost up to $2,800. Repair work is also expensive, from $6 to $20 per square foot. For a 2-foot-by-50-foot walkway or 10-foot-by-10-foot patio, that’s roughly $600 to $2,000 for stamped concrete repairs.

Due to the craftsmanship of stamped concrete, you'll want to hire a concrete contractor who specializes in stamped, stained, and polished concrete for any repairs. Actual repair costs will vary greatly depending on your location and the type of stamp or stain used.

Asphalt

Asphalt patios and sidewalks are among the most budget-friendly types to repair. Expect to pay between $5 and $8 per square foot in asphalt patio repair costs. If the contractor only needs to do a simple patch job, the cost could be even lower.

Brick

Brick patio and sidewalk repair costs tend to be higher, roughly $1,100 to $1,400 for a 100-square-foot project. The contractor will factor mortar and brick prices into their overall estimate; brick also requires more specialized skills, typically from a stone and brick mason, who charge from $70 to $110 per hour.

Stone

Repairing a stone sidewalk or patio costs between $14 and $17 per square foot. Like brick, stone walkways and patios are more aesthetically pleasing than basic concrete or asphalt, but they are much costlier to repair. Typical repair work includes installing replacement stones and mortar to address cracks and gaps.

Tile

While a front sidewalk will not be made of tile, tile is an elegant choice for a private walkway and patio. However, tile patio repair costs range from $400 to $2,000 for a 100-square-foot area.

Typically, contractors will need to replace the grout, which can crumble over time. Tiles can also be chipped and cracked, meaning the contractor may need to replace complete tiles.

Paver

Pavers (also called paving stones) are made of multiple materials, including stone, brick, and concrete. This makes them expensive; the average cost of a patio paver installation is $18 per square foot, and repair work can range from $7 to $30 per square foot.

Cost to Repair a Sidewalk or Patio by Type of Damage

Over time, sidewalks and patios are susceptible to damage. The type of damage can run the gamut, but the most common types that lead patio and sidewalk repair work include sinking, crumbling, and cracks.

Many homeowners are caught off guard when they realize that the sidewalk in front of the home is 9-actually their responsibility. And depending on where you stay, specific tax laws may already be in place to ensure the sidewalks in front of each property remains in good condition.

However, these are not the only sidewalks that need repair from time to time. Many homes are surrounded by them, making sidewalk repairs unavoidable.

Moreover, this isn’t just your average DIY project. For most sidewalk repair jobs, a lot of prep work happens before any repair work can even commence.

Additionally, specialized tools are required to actually complete the job, and unless you have the necessary saw blades and skill to pour concrete, this is a job best left to the professionals.

How Much Does Sidewalk Repair Cost?

Without knowing some obvious details, like the size of the area that requires repair, it would be impossible to give an accurate estimate of just how much your sidewalk repair costs will be.

Also, prices could be affected by the amount of work that has to be done before your sidewalk repair can even start. This may include things like removing tree roots, removal of rubble, repair work to the existing sidewalk, and more. Some jobs may even require additional materials such as a steel mesh or gravel base.

However, there are some basic estimates that can be made to get a fair estimate of what you should be paying for your sidewalk repair job.

Cost Breakdown

Poured concrete, for example, costs roughly $75 per cubic yard. This does not factor in the labor costs, which is usually around $68-$80 an hour, and this will depend on your regional pricing trends as well as the specific contractor you end up choosing.

Also, if your sidewalk has curbing that needs to be replaced, costs will be dictated by the type of material you’re working with. Granite, for example, costs around $25 per linear ft.

Different varieties of concrete curbing should cost anywhere in the region of about $27 per linear ft. But as with any home remodeling or repair job, it pays to compare quotes from professionals in your area.

When taking into consideration most of the related costs, sidewalk repair projects can be done for anywhere between $9-$10 per sq ft. This means that a section of sidewalk of roughly 5′ x 50′ (250 sq ft) should cost between $2,250 – $2,500 to repair.

However, the average sidewalk repair cost comes in at anywhere between $670 – $2,250. For smaller jobs, you could be spending in the region of about $300.00.

The cost to remove rubble, tree roots, or additional repair work can come in anywhere between $325 – $1,500, but this is again subject to the contractor you choose as well as the size of the job at hand.

Concrete sidewalk

Concrete remains one of the most commonly used materials for pouring sidewalks and can be done for anywhere between $5- $15 per sq ft, but usually averages around $8 per sq ft.

Also, small concrete repairs can be done for as little as $1 per sq ft.

Brick repairs

Once you have bricks that are cracked or broken, replacement may be your only option. Brick walkway repair costs can differ so it’s always recommended to compare estimates.

You can expect to pay anywhere between $0.35 – $0.80 per brick. The average brick repair can come in anywhere between $300 – $1,200.

Landscaping costs

Sometimes, minor landscaping repairs are unavoidable, but this shouldn’t be the major price determining factor under normal circumstances.

Expect to pay as little as $200 – $300 if necessary. However, larger jobs can lead to extensive damage, so it’s always best to discuss your options with a reputable local contractor before you go ahead and hire anyone.

How do you fix an uneven sidewalk?

You have three options: coat the sunken section with a sand-and-cement mixture to make the surface higher, raise the sunken section using a process called mudjacking, or raise the sunken section using expanding polyurethane foam. Patching fixes the safety issue without costing much, but the patch is sure to show.

How much concrete do I need for a sidewalk?

For the average 200-square-foot sidewalk, you'll need around 2.5 cubic yards of concrete. This will cost you around $250, but you should order more on the off chance that your sidewalk is thicker than the 4-inch average. You'll also need to pay a local pro to deliver the concrete.