How to program uverse remote to tv

AT&T U-verse enables users to integrate their current televisions, media players and surround sound systems with the AT&T U-verse remote. Connecting a Toshiba remote to your U-verse remote enables you to control your Toshiba television using only the AT&T U-verse remote. Several codes known to work with Toshiba products exist on AT&T's website, but you can also manually search for a code in the event that an established code does not work. Current U-verse receiver models use a black remote, while older models use a silver one. The process for programming your remote varies slightly by remote type.

Searching for a Code with a Black Remote

1. 1.

   Power on your TV and point your remote at your device.

2. 2.

   Press and hold the "TV" and "Enter" buttons simultaneously until the buttons on your remote flash.

3. 3.

   Press the "Scan/FF" button slowly, but repeatedly until the Toshiba TV turns off. If the TV turns off, press the "Power" button to turn the TV back on, then press "Enter" to save your settings.

Entering a Code With a Black Remote

1. 1.

   Press and hold the "TV" button until the remote keys flash.

2. 2.

   Enter one of the following four-digit codes, 1010, 1098, 1104, 1147, 1148, 1149, 1150, 1151, 1173, 1174, 1210, 1215, 1256, 1257, 1263, 1267, 1302, 1311, 1312, 1322, 1332, 1343, 1375 or 1376, then press the "Power" button until the TV turns off. Repeat Step 1 prior to entering a new code.

3. 3.

   Press the "Power" button once more to power the TV back on and save your settings.

Searching for a Code With a Silver Remote

1. 1.

   Turn on your Toshiba TV and point your U-verse remote at it.

2. 2.

   Press and hold the "TV" and "OK" buttons simultaneously until the mode keys flash twice.

3. 3.

   Enter "922" on the number pad within 10 seconds, then press and release the "Play" button.

4. 4.

   Press the "FF" button slowly, but repeatedly, until the TV set turns off. Press the "Power" button to turn the TV back on, then press "Enter" to save the code to your device.

Entering a Code with a Silver Remote

1. 1.

   Turn on the Toshiba television and point the remote by the device.

2. 2.

   Press and hold the "TV" and "OK" buttons simultaneously until the mode keys flash twice.

3. 3.

   Enter one of the following codes within 10 seconds, 1006, 1045, 1058, 1073, 1079, 1085, 1093, 1116, 1154, 1158, 1159, 1175, 1252, 1267, 1281, 1282, 1283, 1284, 1286, 1293, 1294, 1313, 1315, 1319, 1338, 1377 or 1473.

4. 4.

   Press the "Power" button to test the code. If the TV turns off, press "Power" again. If it does not, repeat the process until you locate the proper code.

   

   jerome penn answered

   If you are looking to make the most out of your AT&T UVERSE universal remote control, you should be patient as you configure the technology so it is compatible with your VIZIO HD television. If you’re having trouble understanding the instructions provided in the manuals of your TV set, as well as the guidelines provided in the packaging of your universal remote control, there is another way to make the most out of this great entertainment gadget. Firstly, you need to ensure that you have both the remote control and the TV to hand.
   
   You should bear in mind that there are limits in place to ensure that no random universal remote control can take control of your electrical appliances. Once you have turned both the TV and the signal receiver for the remote on, the next challenge is to take the AT&T UVERSE handset and to press both the ‘TV’ and the ‘OK’ button simultaneously. After holding this position for a few seconds, you also need to stop pressing both buttons at the same time, too.
   
   The remote control has indicators to show that the programming has been successful. If you have done this correctly, the top of the remote will begin to flash intermittently. At this point, type in the code ‘1343’ to ensure that the TV and the UVERSE handset are linked together permanently.
   
   Your only challenge now is to make sure that the remote is working along with the television. Try turning up the program that’s currently on using the volume buttons, or if you have never liked the presenter of that show, turn it over. It’s unlikely that you’ll have the problem if you’ve followed the instructions succinctly!

   • Thank Writer
   • Comment
   • Blurt

   thanked the writer.

   blurted this.

   

   Anonymous answered

   Turn your TV and you-Verse receiver ON.
   Take the you-Verse remote control, then do the following:
   
   1. Press and hold the TV button,
   2. While holding down the TV button, press the OK button, then release both buttons at the same time. All the buttons at the top of the remote should blink twice.
   3. Then type in the number 1343.
   
   After you type this number, the TV button should blink at the top of the remote.
   
   Press the ATT button at the top of the remote to put the remote control back in the ATT mode, then press the Power button. Now the TV and you-Verse receiver should both turn off, and when on, you should be able to change the volume and channels using the you-Verse remote.

   • Thank Writer
   • Comment
   • Blurt

   thanked the writer.

   blurted this.

   How do you sync an AT&T uverse remote?

   Turn on the equipment to be programmed, such as the TV, DVD player, or auxiliary equipment, and point the remote control at the selected equipment. Press and hold the mode button you want to assign to the equipment (TV, DVD, or AUX) along with the Enter button. Hold both buttons for one second, and then release.

   How do I program my on remote to my TV?

   Programming your remote is as easy as 1,2,3.

   Press and hold the button until the button lights up red. The button's red indicator light remains red..

   Select the device you want to program from the Device Categories: ... .

   Enter the 4-digit code from the included list for the category and brand of your device..

   How do I program my S30 remote to my TV?

   S20 and S30 remotes.

   Find your TV Brand in the chart below and its corresponding number..

   Press and hold the OK and Menu key at the same time for three seconds until the Power key flashes red twice to confirm you are in program mode..

   Press On Demand to program the TV code..

   How do you connect uverse to TV?

   On the back of the AT&T U-verse receiver, look for the connection HDMI. Connect the HDMI (shown above) to your television. Do not disconnect any Network or TO WALL cables. Plug your AT&T U-verse receiver into the wall to give it power.