How many miles can a chrysler 200 last

With its advanced safety features, great gas mileage, and upscale interior, it’s no wonder the Chrysler 200 remains a popular pick in the midsize car segment. But just like any other vehicle, issues and problems are bound to arise regardless of how reliable the Chrysler 200 is.

How Reliable Is the Chrysler 200?

RepairPal gives the Chrysler 200 a 4.0 out of 5.0 reliability rating, ranking it 12th out of 24 midsize cars. The annual repairs and maintenance for this model typically cost around $549 compared to the average $652 for other models, which means it has lower than average ownership costs. Owners of the Chrysler 200 usually bring in their vehicles for unscheduled repairs 0.3 times a year compared to the average 0.4 with a 12% probability of needing a major fix.

200% ready for the weekend. #200 pic.twitter.com/B37sv4tpbs

— Chrysler (@Chrysler) October 22, 2016

Top Chrysler 200 Problems

As dependable as the Chrysler 200 is, it may develop problems over time. Below are some of the model’s most common issues found across different model years:

Random Deployment of Active Head Restraints

The active head restraints (AHR) in some 2011-2017 Chrysler 200s have been reported to deploy randomly due to a factory defect. According to the National Highway Traffic Safety Administration (NHTSA), the AHRs were manufactured using a plastic material that breaks due to stress or fatigue instead of deploying upon a rear-end collision. Because of this, many drivers have reported suffering minor injuries and concussions.

Excessive Oil Consumption

Some 2015-2016 Chrysler 200s with 2.4L Tigershark engines have been reported to consume too much oil. The owners of the affected models have complained that their vehicles tend to consume a quart of oil every 1,000 miles and that the low oil pressure warning light doesn’t turn on when the oil level drops to 3.5 quarts or lower.

How many miles can a chrysler 200 last
How many miles can a chrysler 200 last
Some 2015-2016 Chrysler 200s with 2.4L Tigershark engines have been reported to consume too much oil. Image source: Wikimedia.

According to reports, the piston rings inside the engine were not compatible with the cylinders, causing oil to leak and burn off in the compression cycle. Keep in mind that low oil levels will prevent moving parts in the engine from getting lubricated properly. This could cause various components to wear prematurely and result in a series of drivability issues if left unaddressed.

Transmission Failure

Transmission failure is one of the most common 2015 Chrysler 200 problems reported by many drivers. The owners of the affected vehicles have reported that their cars automatically shift to a lower gear despite having a new transmission. Many drivers have also complained that they can’t use their brakes and parking brakes, which led them to coast to a stop. While some were able to stop their vehicles safely, others got into minor accidents because of this problem.

Many owners have also reported that their vehicles would jerk and kick forward when they step on the brake pedal. This led to some headlights falling out of their casings and rear tires coming off their rims while driving.

Some 2015-2017 Chrysler 200s with a nine-speed transmission have been reported to have a couple of issues when shifting gears. The affected vehicles would lurch through gears, and they would sometimes shut down or automatically shift to neutral. According to the automaker’s findings, this issue was caused by a terminal crimping issue with 26-way connectors on the sensor cluster harness assemblies.

In 2016, Fiat Chrysler Automobiles (FCA) recalled certain 2015 Chrysler 200 vehicles equipped with a nine-speed gearbox because they tend to shift into neutral when in motion. This led the NHTSA to issue the recall notice, as unexpected shifting can increase the risk of a crash.

Engine Stalls While Driving

Both generations of the Chrysler 200 have had widely reported problems of stalling without warning. In 2012, the NHTSA opened a preliminary investigation after 15 units of 2011-2013 Chrysler 200s stalled during low-speed deceleration, such as braking for a stop sign or traffic light. After further investigation, it was revealed that a defective powertrain control module (PCM) initiated a purge monitor check whenever the vehicles were idling or slowing down. This resulted in an overly rich vapor condition that caused the engines to stall.

Electrical Issues

How many miles can a chrysler 200 last
How many miles can a chrysler 200 last
Some owners of first-generation Chrysler 200s have reported issues like the fuel pump failing to send fuel to the engine and airbags deploying randomly because of a defective TIPM. Image source: Wikimedia.

One of the many advantages of owning a late-model Chrysler is its totally integrated power module (TIPM). The TIPM is the gateway for the vehicle’s entire electrical system that takes commands from switches and modules. It converts the commands into voltage or ground. The TIPM, however, doesn’t come without faults.

Some owners of first-generation Chrysler 200s have reported issues like the fuel pump failing to send fuel to the engine and airbags deploying randomly because of a defective TIPM. No recalls were made for the affected Chrysler 200 units. But other FCA-owned makes, such as the Jeep Grand Cherokee and Dodge Durango, have been recalled for an extended warranty on fuel pump repairs and reimbursements for previous TIPM replacements.

Defective Heater

Many 2012 Chrysler 200 owners have complained about a defective heater on the passenger side. Most report that the issue recurs even after flushing the heater core and replacing the radiator. A replacement heater core typically costs around $60 to $100, while the price for a new radiator is between $200 and $800 plus labor costs.

How many miles can a chrysler 200 last

Engine Automatically Shuts Down

There have also been several reports of the 2012 redesign shutting down without warning. The owners of the affected units report losing steering and braking control before the engine died. While most were able to get their vehicles running after unhooking the negative battery terminal for a few minutes, some were unable to do so even after replacing the fuel pump.

Even a model as reliable as the Chrysler 200 is bound to develop issues that could affect its drivability and performance as it racks up mileage. So it’s important to watch out for symptoms that may indicate a faulty part. It’s also a good idea to keep track of recalls issued by the NHTSA, so you can resolve your vehicle’s issues before they escalate to bigger problems in the future.

How many miles can a Chrysler 200 go?

Compare Side-by-Side.

Is a Chrysler 200 a reliable car?

The Chrysler 200 Reliability Rating is 4.0 out of 5.0, which ranks it 12th out of 24 for midsize cars. The average annual repair cost is $549 which means it has lower than average ownership costs.

Do Chrysler 200 have problems?

The Chrysler 200's Engine Design Flaw Can Cause Stalling Or Stuttering. The car's engine is another major problem that many owners have complained about. To be specific, the 2.4-liter TigerShark inline-4 engine is the issue. Most of the issues have been that the automobile would stall or die while driving.

How many miles does a Chrysler last?

Key Takeaway As long as you take good care of your Chrysler 300, it should last around 13 years and 200,000 miles.