How to change filter on lg fridge

Nothing beats the convenience of getting water from yourLG fridge’s water dispenser. Still, that convenience does require a bit of maintenance on your part, which is to change thewater filterevery 6 months.

You can change thewater filterby locating it in the fridge compartment. You won’t need tools to open the holder and remove the existing filter. Then, install a genuine and compatibleLG water filterinto the holder. Flush at least 2.5 gallons of water through the new filter before using the dispenser.

The change and reset process is very straightforward, so don’t worry if you haven’t done it before. This guide will walk you through every step of the way.

How Do You Change TheWater FilterOn An LG Refrigerator?

Changing thewater filteron anLG fridgeis pretty straightforward. You can even get the job done in just a few steps.

But before you start, shut off the water supply at the back of your fridge. The shutoff valve should be fully closed to ensure no water enters the appliance while you’re changing the filter.

Next, press the dispenser lever to drain all water from the appliance. Keep pressing the lever until no more water comes out.

Lastly, find the filter in your refrigerator model and lay a towel down underneath it. 

You’ll typically find it on the top of the fridge compartment close to the rear left-hand corner. Other models might have their filters concealed inside one of their doors. But, again, you should refer to the user manual to see where yours is located.

Once you’ve completed the preparations, you can follow these 5 quick steps to change the water filter in your LG fridge:

Step 1: Open Filter Holder Or Cover

Thewater filterin your refrigerator is never left exposed. Instead, it’ll have a holder and a cover to conceal it, helping the filter blend in with the rest of your fridge interior.

At this point, you’ve located the filter holder and prepared a towel underneath it. So, the first step is to pop that filter cover open. You can do so by hand, as no tools are necessary for any step of this process.

Once you open it, you’ll have access to thewater filteryou’re about to change.

Connect with an Appliance Repair Tech

Click here to use the chatbox to speak with one of our technicians.
No in-home service calls. No appointments.

Read: How To Fix LG Refrigerator Ice Maker Freezing Up

Step 2: Release Filter Pivot And Remove

Next, you’ll need to get the used filter out of that holder. 

Firstly, grab the filter and pivot it out from its holder. So, for example, if your filter is at the compartment’s top, you’ll be pivoting it downwards.

Then, you can pull the filter out of its position. Be careful when you do this, as any leftover water might drip out. Thankfully, you’ve already prepared a cloth underneath it earlier.

With the filter removed, you can wipe the area inside its holder to remove any dirt or other buildups.

Read: LG Refrigerator Error Code E Ch – Troubleshooting Guide

Step 3: Install The New Filter

The next step is to take your newLG fridgewater filterout of its packaging. Then, you can install it in the filter holder in the opposite sequence you followed in Step 2.

So, push the filter into place. Once it fits snuggly, pivot the filter upwards so it sits in the holder.

You can close the filter cover when you’re confident that everything fits correctly and the filter isn’t loose.

Step 4: Flush The Filter

The job doesn’t end after you’ve installed a new filter. There are still two crucial steps you must take.

Firstly, you’ll want to flush the filter to remove any carbon and air bubbles trapped in the water line. These things can prevent water from flowing smoothly later, so it’s best to get the flushing done early.

Besides that, flushing the filter helps eliminate that ‘new filter taste’ you’ll find in the water.

You can begin the flushing process by turning the water supply back on behind the fridge (you shut that off earlier). Then, keep the water dispenser lever pressed to flush at least 2.5 gallons of water through the filter.

Doing that will take approximately 5 minutes to complete. So, you can simplify the process by flushing that water into a large container like a bucket.

Step 5: Reset The Filter Indicator

There’s a strong chance that you replaced the filter because its indicator was illuminated on the control panel. Now that you’ve completed the replacement, you’ll want to reset that indicator, so it turns off.

Read: LG Refrigerator Error Code E FF – Troubleshooting Guide

How Do I Reset My LG Filter Indicator?

Resetting the filter indicator on yourLG fridgeis incredibly simple. Press and hold the button on the control panel until it turns off. 

Typically, you’ll have to hold the button for 3 seconds.

You can be sure of the duration that applies to your model by checking the control panel. The duration is printed on the filter indicator button.

Why Is The Water In MyLG FridgeNot Cold?

You’ll surely want to have a drink after installing your newwater filter. You can certainly do that, but don’t be surprised when it doesn’t dispense the cold water you’re expecting.

Here’s why the water coming from the dispenser is warm after a filter change:

#1 The Water Reservoir Is Empty

Firstly, you must understand that the water reservoir no longer has chilled water. 

The reservoir is small and only designed to hold 1-2 cups of cold water at a time.

Secondly, you drained the reservoir before you began replacing the filter.

Read: LG Refrigerator Error Code DH F – Troubleshooting Guide

#2 The Water Is Directly From The Water Line

When the reservoir is empty, and you push the dispenser lever, the water you get is from the water line behind your fridge. Then, of course, the water passes through the new filter and is safe to drink. 

However, its temperature still wouldn’t have changed. So instead, the water passes through to the dispenser and down into your cup.

#3 The Fridge Hasn’t Had Time To Chill The Water

Overall, the water you get isn’t cold after a filter change because it hasn’t had enough time to cool down.

An empty reservoir will need at least 6 hours to refill with water and chill it down. After that time, you can begin to enjoy cold water directly from yourLG fridgewater dispenser.

Frequently Asked Questions (FAQs)

If you still want a bit more clarity on changing and resetting yourwater filter, check out these common questions and answers below:

How Often Should I Change AnLG FridgeWater Filter?

You can expect to change yourLG fridgewater filterevery 6 months. The indicator on the control panel will light up to remind you. However, you’ll want to change the filter more frequently if you use the dispenser heavily or your local water supply is dirty.

Read: LG Refrigerator Error Code FF: Troubleshooting Guide

Do I Really Need To Change My LG RefrigeratorWater FilterEvery 6 Months?

Yes, you have to change yourwater filterevery 6 months. The filter will become saturated with dirt and other impurities if you don’t. That will lead to restricted water flow, dirty water, and an unpleasant taste in the water you drink.

How Do I Know When To Change MyLG Water Filter?

You’ll know it’s time to change your filter when 6 months have passed since your last change. Simultaneously, an indicator on the control panel will let you know a change is due.

Are LG Water Filters Interchangeable?

No, LG water filters are not interchangeable or universal. Instead, you must find a filter compatible with your fridge model, or else it won’t fit.

Can I Use A GenericWater FilterIn My LG Refrigerator?

No, you cannot use a genericwater filterin yourLG fridge. Instead, you should only use a genuineLG water filterthat’s designed specifically for use with your fridge model.

Where is the water filter located in an LG refrigerator?

How do I reset my LG air filter?