The Chevy Malibu's key fob or transmitter battery can be changed by separating the back and front sides of the fob. Remove the key and insert a small screwdriver in the key hole to pop the fob open. Pry open the back and front of the assembly and remove the electronic board or panel covering one 3-volt battery. The 3-volt CR2032 can be purchased from any general retailer and is the same battery used in watches and small mechanical devices. Pop out the Malibu's used CR2032 using the same flathead screwdriver. Replace with new part until a "click" is heard, plus-side down. To close the remote, repeat assembly steps in reverse order. accountCircle Trevor B. April 9, 2020 You can remove the back of the key and pull the battery out. Then you can put a new battery in. The Questions and Answers on this page are the statements and opinions of their respective authors and not VehicleHistory.com. VehicleHistory.com does not research or authenticate any of the Answers provided. How do you open a key fob for a Chevy?Press the small button on the side or back of the key fob while pulling out the side closest to the button. This will reveal the mechanical key inside. Find the small slot on the right side of the driver's door handle. Insert the mechanical key into this slot and push upward all the way until the cover pops off.
|
How to open key fob chevy malibu
Related Posts
Copyright © 2024 en.apacode Inc.
