Changing the water filter on a frigidaire refrigerator

    • Locate the water filter in the back of the interior compartment.

    • It looks like a long white cylinder.

  • Changing the water filter on a frigidaire refrigerator

    • Push back on the compartment to remove the filter.

    • The filter will then pop out.

    • Remove the used filter and discard it.

    • Unwrap the replacement filter from its packaging.

    • Insert the replacement filter into the water filter housing.

    • You should hear an audible click when the filter is in place.

    • Once the filter is in place, close the refrigerator door and press the water button on the freezer side.

    • Run the water for 2-3 minutes, or run approximately 2-3 gallons of water through the system to flush the filter with running water.

    • On the right inner side of the fridge, you will find the model number.

    • Identifying the correct model number will ensure the proper purchase of the new water filter.

  • Changing the water filter on a frigidaire refrigerator

    • Click options on the control panel on the front of the left door.

    • Here it will say ice maker is on, click the minus button to turn it off.

    • You will hear a beeping sound to ensure that the ice maker is turned off.

    • The water filter is in the upper right corner of the fridge.

    • To remove the water filter turn it to the right until you feel it detach.

    • Then pull the filter straight out slowly from its slot.

    • Water may drip from the filter upon removal. Putting a towel underneath and removing products from that area will ensure an easy clean-up.

    • Once the filter is removed, identify the model number on it.

    • The model number will ensure you buy the correct replacement at the store.

    • Upon getting the new filter from the store install it into the fridge.

    • Insert the filter straight into its designated slot.

    • Twist the filter to the right until you feel and hear it click into place.

    • To turn the icemaker back on click the options button and hit the minus button, it will beep indicating it is back on.

    • To reset the water filter you hit the down arrow button beneath the options button and go down to "water filter".

    • Press and hold the set button above the minus button on the right side, it will then say "good" next to the water filter.

    • Press options again to return to the main screen.